DEI 465T H5LAL777A REMOTE CAR Replacement Transmitter UNCODED Trinary 2-Button 3 Channel Key Less Entry Red LED 460T 1 BUTTON BINARY UNCODED
Condition: Used - Like New (Back cover corner Rubed)
Content: One Remote only no key ring
Description: 2-button, Uncoded, Trinary, 3-channel, Red LED, 302 MHz, 2/29 codes, Non-Code-Hopping replacement remote. Used with most DEI Systems (Automate, Equalizer, Hornet, Pro Guard, Python, Sidewinder, Steal Stopper, & Viper) manufactured between 1992 &1996 (Date Codes 2K thru 6H). The newer DEI 493T replacement remote is not interchangeable with the older DEI 465T remotes. You must use the correct remote that matches your DEI system. The DEI 465T FOB remote has 10 traces in the circuit board that must be "cut" to exactly match the traces that are cut on the circuit board of your specific DEI system. Your DEI system has a unique "transmitter code" that determines exactly which of the 10 traces needs to be cut to match your system. Traces must be cut according to the instructions included with the remote. You cannot just "match" the cuts on your original remote and the replacement remotes
Used with older versions of the DEI Valet 711T &the 712T Keyless Entry Systems and with some of the older versions of the DEI Steal Stopper, Viper &Wasp alarm systems.
Some older key fob transmitter remote
original cases may also have the following:
Des. 340,000 ( Des. 347,190 )
REPLACES: AT-600, J552318T1
465T 2BTN DEI KEYLESS REMOTE FOB J552318T1 H5LAL777A
BOARD # 777A to 777A-5 302Mhz (302 MHz) Non-Code Hopping. 2/29
Model / SKU: 465T
FCC ID P/N : H5LAL777A
Locating the transmitter code The "transmitter code" should be found inside an original remote transmitter on a white sticker attached to the black chip in the lower part of the right hand photo. It will read 2 xxx D. (Such as 2186D, or 2153D, etc.) This code will enable us to cut the correct traces for you.
The "transmitter code" may also be found on a white sticker on the DEI system's control unit, CPU, (also known as "the brain").
Programming 465T & 493T Instruction
Cross Reference Transmitter
To Use with:
WILL WORK WITH THE FOLLOWING AFTERMARKET INSTALLED KEYLESS ENTRY / ALARM SYSTEMS...
Automate 3, 4, 6, 7, 8
Valet 519T, 711T, 712T
Hornet 710T, 715T, 717T, 730T
Steal Stopper 50, 50/s, 60, 60/s
70, 80, 1000
Viper 100, 150, 300,
350 Classic, 400, 450, 500,
550 Classic, 600, 600 Classic
|Viper DEI 467||EZSDEI467||Des.333.634||2|
|469T|| || || |
|DEI RPN 471T||EZSDEI471||Des.333.634||2|
|476V||EZSDEI476|| || |
|RPN 492T||EZSDEI493C||Des.347.190|| |
|APS2K4S50CS|| || || |
|APS2K4MS50CS|| || || |
|DIYTX|| || ||4|
|433 MHz|| || ||4|
|2Way Security|| || ||5/LCD|
|ASTRA|| || ||4|
Information's are here for your reference only and accuracy can not be guaranteed.
Copyright © 2006 - 2011 All rights reserved
This product was added to our catalog on Sunday 28 September, 2008.